The compact Retractable Web Lanyard has a wide range of uses in Fall Protection applications. The lanyard hooks to a D-ring on a fall protection harness, then plays itself out as the worker moves around, and retracts to take up the slack to avoid tripping hazards.

The self-retracting MiniLite Fall Limiter is a compact lanyard with a quick activating brake system. Limits free falls.

The Retractable Web Lanyard allows flexibility of movement to and from an anchorage point without allowing slack in the lanyard, which could result in a long free fall.

This lightweight, self-retracting lanyard is ideal for when the user must use a lifting pole to reach a remote anchorage point.

The Retractable Web Lanyard allows flexibility of movement to and from an anchorage point without allowing slack in the lanyard, which may result in a long free fall.

Decelerator Energy Absorbing Lanyards have an energy-absorbing core that limits fall arrest forces to under 900 lb. A tough outer nylon or polyester tube jacket also acts as a back-up lanyard, while a warning flag provides a visual signal that the lanyard has been in a fall.

In a fall, the Decelerator will reduce the impact load experienced by the wearer, limiting the arresting forces to under 900 lbs.

The Manyard II Lanyard contains shock-absorbing inner core material surrounded by a super-strong outer jacket.

The fact that the EZ Stop Retrax is retractable makes it unique among other shock-absorbing lanyards.

Workman shock-absorbing lanyards are lightweight with a low-profile body. The Workman Twin-Leg Shock-Absorbing Lanyard, a critical component of personal fall arrest systems, connects the back D-ring of a full body harness to a qualified anchorage point. Made of lightweight, durable 1-3/4” yellow polyester webbing. The shock absorber includes a clear, durable protective cover over the labels to increase service life and allow for easy inspection.

The fact that the EZ Stop Retrax is retractable makes it unique among other shock-absorbing lanyards.

The EZ Stop II Lanyard utilizes a tearing action in the shock-absorbing pack to keep the fall arresting forces under 900 lbs.

This lanyard is designed with an inner core of shock-absorbing material that expands to a maximum of 3-1/2", allowing a soft, stable stop in case of fall.

The StretchStop Lanyard stretches from 4 to 6', offering excellent worker mobility.

The Manyard II Lanyard contains shock-absorbing inner core material surrounded by a super-strong outer jacket.

The unique stretchable design of the ShockWave2 Shock-Absorbing Lanyard allows it to contract to 4' in length when no tension is present, reducing risk of tripping.

The Workman Single-Leg Shock-Absorbing Lanyard, a critical component of personal fall arrest systems, connects the back D-ring of a full body harness to a qualified anchorage point. Made of lightweight, durable 1-3/4” yellow polyester webbing.

The FP Diamond Shock-Absorbing Lanyard features a strong durable sheath with a highly visible deployment tag.

Model 1240906 is a two-legged shock-absorbing lanyard that provides workers with 100% tie-off capability. Expands up to 6' and contracts down to 4-1/2'.

The ShockWave Shock-Absorbing Lanyard is made for work situations where 100% tie-off is needed. It is part of the EZ Stop® II Series, which includes many specialty lanyards made for certain work environments.

In the event of a fall, this lanyard absorbs the energy released when the falling worker reaches the end of his lifeline, protecting him from harm.

The Force2 is a shock-absorbing lanyard designed to be attached to an anchorage point at the worker’s feet when no overhead anchorage is available, a situation which creates a much greater free fall distance.

The tie-back model EZ Stop II eliminates the need for a separate anchorage connector. All EZ Stop II lanyards utilize a controlled tearing action when subjected to fall arrest forces, limiting arresting forces to no more than 900 lbs.

The ArcSafe Lanyard provides arc flash protection up to 40 cal/cm2, and is designed for utility and maintenance workers.

The fact that the EZ Stop Retrax is retractable makes it unique among other shock-absorbing lanyards.

EZ Stop II 100% Tie-Off Shock Absorbing Lanyard is a double-leg shock-absorbing lanyard made for work situations where 100% tie-off is needed. Internal elastic band expands to 6' when pulled, then contracts down to 4-1/2', keeping it out of the worker's way.

The FP Diamond Shock-Absorbing Lanyard features a strong durable sheath with a highly visible deployment tag.

This lanyard is designed with an inner core of shock-absorbing material that expands to a maximum of 3-1/2", allowing a soft, stable stop in case of fall.

The SafeStop® Absorber utilized by the Safestretch Lanyard limits impact forces in the event of a fall.

The Manyard Lanyard contains shock-absorbing inner core material surrounded by a super-strong outer jacket.

The Titan T-BAK Lanyard is a pack-type shock-absorbing lanyard designed for tie-back use.

The fact that the EZ Stop Retrax is retractable makes it unique among other shock-absorbing lanyards.

The ShockWave2™ shock absorbing lanyards are stretchable for complete freedom of movement, this twin-leg model allows you to keep one leg attached to the anchorage while the other leg is always ready to be hooked to the next anchorage. The ShockWave2™ incorporates a unique inner core that immediately begins to extend and absorb energy during a fall, limiting arresting forces to no more than 900 lbs. Reduces trip fall hazards, dragging and snagging for complete freedom of movement. Twin-leg 100% tie-off style helps you remain connected at all times.

The Workman Single-Leg Shock-Absorbing Lanyard, a critical component of personal fall arrest systems, connects the back D-ring of a full body harness to a qualified anchorage point. Made of lightweight, durable 1-3/4” yellow polyester webbing.

EZ Stop II 100% Tie-Off Shock Absorbing Lanyard is a double-leg shock-absorbing lanyard made for work situations where 100% tie-off is needed. Internal elastic band expands to 6' when pulled, then contracts down to 4-1/2', keeping it out of the worker's way.

The Manyard II contains shock-absorbing inner core material surrounded by a super-strong outer jacket.

The EZ Stop III Lanyard combines exceptional strength and ease of use into one safe and effective shock-absorbing lanyard.

The SafeLight Shock-Absorbing Lanyard’s lightweight nylon webbing construction adds protection without adding a lot of weight. An integral SafeStop® shock absorber reduces the force of a fall so that the wearer comes to a smooth stop.

The reliable Soft Pak component of this Energy Absorbing Lanyard has been tested and proven year after year to limit the energy of a fall to less than 900 lb.

The 6’ Titan™ Shock-Absorbing Lanyard is constructed of lightweight, durable webbing with locking snap hook or rebar anchorage harness connections.

The strong, safe BackBiter Lanyard is specifically designed for tying back at any angle.

The unique stretchable design of the ShockWave2 Shock-Absorbing Lanyard allows it to contract to 4' in length when no tension is present, reducing risk of tripping.

The hook of the Wall Form Hook and Chain Lanyard is tapered to 1/4” at the end to fit most wedge bolt slots or holes on wall forms, providing fall protection to wall form workers.

The Rebar Positioning Lanyard is designed for workers who need to position or restrain themselves when working on rebar construction, such as rebar tying.

The Rebar Positioning Lanyard is designed for workers who need to position or restrain themselves when working on rebar construction, such as rebar tying.

Nylon Webbing Lanyards are economical, abrasion resistant, and easy to clean and store.