Premium side split leather glove is durable and has good heat and abrasion resistance.

The Showa Hi-Tech High Performance Chemical-Resistant Glove is triple dipped in PVC for resistance to chemicals and oil.

Seamless construction gives this glove excellent longevity and resistance to the stresses of construction and assembly work.

Traverse freely along pipes and beams with Hand Grips.

A mesh and elastic body provides comfortable and secure back support.

Seamless construction makes the Performers Extra Web-Coated glove comfortable, durable and cost effective.

Convenient Instant Cold Packs activate immediately, providing temporary icy relief from minor swelling, sprains and strains.

The Sol-Vex is an unsupported premium-quality nitrile glove. Excellent protection against cuts and punctures.

The 4991 High-Visibility Long Rain Coat extends down past the knees to provide maximum waterproof protection against the hardest rain. The bright fluorescent lime color and reflective silver stripes assure that you’ll be seen in the rain.

The breathable micro-foam nitrile coating on the MaxiFlex II Glove provides added protection on the palm, fingers and knuckles. Ideal for use in applications which require a high degree of gripping ability, sensitivity and dexterity.

Used to secure worker to beam.

The fluorescent red-orange Vinyl Safety Flag is made of a durable vinyl-coated nylon and is attached to a 3/4"-diameter hardwood handle.

You’ll always have your respirator where you need it when you need it if you keep it in a WorkSmart Respirator Bag.

Supply clean, breathable air to workers in contaminated environments up to 300' away with the portable Free-Air Pump. Designed for use with one continuous flow airline hood/helmet-style respirator or with two tight-fitting facepiece-style respirators approved to operate at 15 psig or less.

The 700 Series Regulators are a single stage design used for the 6D, 7EOC, and 8AL cylinders. They are preset with a specific flow rate which is determined by the customer.

The nonsparking collapsible Response Shovel has a quick release aluminum shaft that breaks down to fit inside spill kits as small as five gallons.

Use the Cross-Arm Strap when you need a secure anchor point for lanyards or other connecting devices.

Slow-recovery foam provides comfort with low pressure.

Slow-recovery foam provides comfort with low pressure.

Provide workers with easy access to Material Safety Data Sheets with the Right-To-Know Compliance Center.

The Shockbuster GFCI 5-Outlet Adapter is used to provide ground fault circuit interruption to any wall outlet.

The Benchtop Rinse Tank conveniently sits on a counter or bench for easy access.

The Carbonized Acrylic Felt Welding Blanket is lightweight but intended for use in heavy-duty applications.

The Tigerhood is made from tough, heat-resistant Noryl thermoplastic. It combines under-chin and straight-front helmet benefits to increase welder comfort and protection.

Temporarily relieves occasional minor sore throat pain and dry, scratchy throat.

Contractor Pro Safety Eyewear has the DeWalt logo clearly emblazoned on the temples, which signifies its toughness.

The Red Ram heat-resistant Leather Bib Apron is made of specially chrome-tanned premium heavy side split cow leather, so it’s soft and durable, yet able to resist sparks, cuts and slag.

The corrosionproof, water-resistant MityLite 2430 is housed in a virtually indestructible ABS resin plastic case with a polycarbonate lens.

Deluxe Faceshields are molded from durable polycarbonate and are intended for protection in Hazard Risk Category 2 applications.

Provide added protection against the sun and elements with the Sun Shield extended brim.

Cylinder Storage Lockers safely secure LPG and compressed gas cylinders from theft and unauthorized access. The all-welded expanded aluminum construction will not rust, corrode or discolor.

DuPont Tychem BR fabric provides greater than eight-hour breakthrough times for most ASTM F1001 chemicals, offering high-quality chemical protection, user flexibility, abrasion resistance and exceptional freedom of movement.

The V-Gard Protective Safety Helmet has a polyethylene shell and suspension system that work together as a system to protect the head against top impacts. Small size fits hat sizes between 6 and 7-1/8.

The easy-to-use DC Axial Blower with Canister-25 forms a complete ventilation system.

The heavy-duty cotton/acrylic knit shell and durable nitrile coating of Grip N Double Nitrile Gloves provides superior puncture and abrasion resistance.

Chemsplash Coveralls are the first chemical splash barrier coveralls to offer outstanding breathability and continuous outward moisture vapor transmission.

The GR50 Series Respirator with Grinding Hood Helmet protects the entire head, face and neck and is designed for use while grinding, brazing or metalworking.

The Flame-Resistant Sleeve offers economical protection from sparks, radiant heat, abrasion and minor cuts and burns. Made of 9-oz cotton that has been treated with a flame retardant so it will not ignite.

A Titan Full-Body Harness and Titan Lanyard are offered together to make it easier to meet your fall protection needs.

The Panther Self-Contained Breathing Apparatus is designed for firefighting. Features include first- and second-stage regulators, First Breath-On and an Air Klic regulator fastener.

Acetaminophen, an aspirin-free pain reliever, provides temporary relief from minor aches and pains.

The wide-body design of the W Series Traffic Cone helps ensure its stability.

Dispose of spent aerosol cans safely and conveniently with the Aerosolv Aerosol Can Disposal System. Aerosolv’s puncturing unit relieves remaining pressure in aerosol cans, changing them from solid hazardous waste to nonhazardous, recyclable waste, which is far less expensive to dispose of.

MicroMAX Coveralls provide cost-effective, limited-use protection in nonhazardous environments.

The FLEX-O-THANE construction of the sturdy PVC Overshoe provides complete waterproof protection and excellent cold weather flex.

The Compliance SafePack Plus is an easy way to upgrade eyewear.

The yellow Tie-Off Adapter anchorage connector is constructed of 1-3/4" polyester webbing.

The design of E-A-R Push-Ins Earplugs eliminates the need to roll down the earplugs for fit prior to inserting in the ear.

The design of E-A-R Push-Ins Earplugs eliminates the need to roll down the earplugs for fit prior to inserting in the ear.

The Consolidator begins with a soft interlock cotton lining that is fully coated with nitrile rubber. Then it is cut and sewn into a snug pattern that allows maximum dexterity.